Professional China Adhesives For Wind Turbine - Wind Turbine Blade Polyurethane Infusion Resin WD8085A/WD8085B / Wind Power Blade Epoxy Matrix Resin WD0135/WD0137 – KANGDA

Short Description:

Product Detail

Product Tags

Feedback (2)

Dedicated to strict high-quality management and considerate purchaser support, our experienced employees members are usually available to discuss your specifications and be certain full shopper satisfaction for Shoe Sole Adhesive, Casein-Based Labelling Adhesives, Sealants For Electronic Assemblies, And we are able to enable on the lookout for any products with the customers' needs. Make sure deliver the best Assistance, the most beneficial High-quality, The quickly Delivery.

Professional China Adhesives For Wind Turbine - Wind Turbine Blade Polyurethane Infusion Resin WD8085A/WD8085B / Wind Power Blade Epoxy Matrix Resin WD0135/WD0137 – KANGDA Detail:

Wind Turbine Blade Polyurethane Infusion Resin WD8085A/WD8085B

WD8085A/B is specially developed for the vacuum infusion process of wind turbine blades. It has low viscosity at room temperature, long operation time, fast curing after heating, and high production efficiency. It has excellent mechanical properties, excellent impact resistance, fatigue resistance and chemical corrosion resistance.

Wind Power Blade Epoxy Matrix Resin WD0135/WD0137

The main agent WD0135 and curing agent WD0137 are two components of the solvent-free epoxy resin system. After mixture, the resin system exhibits low viscosity, long operating time, and after being cured, it exhibits high strength, high toughness, low density, low shrinkage and other properties. Therefore, the WD0135/WD0137 epoxy resin system is especially suitable for vacuum infusion to wind turbine blades .

The WD0135/WD0137 resin system has low mixing viscosity, excellent wetting property to glass fiber, and the system does not contain any volatile substances, suitable for RTM vacuum infusion craft, mainly used in the manufacture of wind turbine blades.

Wind Turbine Blade Polyurethane Infusion Resin WD8085A/WD8085B	Wind Power Blade Epoxy Matrix Resin WD0135/WD0137
Low viscosity, Long operation time, good wettability	Accredited by GL;
Fast curing speed, shorten molding time	low viscosity, excellent wettability;
Special formula design reduces sensitivity to moisture	Excellent physical and mechanical performance and excellent fatigue resistance.
Excellent physical and mechanical properties and fatigue resistance

Applicable to vacuum filling process of wind turbine blade; Applicable to preparation of glass fiber composites.

Teach you how to choose a reliable wind turbine blade adhesive:

A) With high strength and toughness, must be able to withstand the centrifugal force of each blade;

B) Excellent operating characteristics, such as no slump, easy pumping, etc.;

C) Good wetting and thixotropy;

D) High compressive resistance, fatigue resistance and aging resistance;

E) The reaction cycle of the adhesive should be closely consistent with the working cycle of the blade die;

F) Excellent gap filling ability, suitable for adhesive tape of different thickness;

G) Low heat release and low curing shrinkage.

Product detail pictures:

Related Product Guide:

go on to boost, to be certain item quality in line with market and buyer standard demands. Our firm has a excellent assurance procedure happen to be established for Professional China Adhesives For Wind Turbine - Wind Turbine Blade Polyurethane Infusion Resin WD8085A/WD8085B / Wind Power Blade Epoxy Matrix Resin WD0135/WD0137 – KANGDA , The product will supply to all over the world, such as: Brunei, Grenada, Durban, We also provide OEM service that caters to your specific needs and requirements. With a strong team of experienced engineers in hose design and development, we value every opportunity to provide best products for our customers.

Adhesives For Wind Turbine Blades