New Fashion Design for Polyester Hot Melt Adhesive - WD8118A/B Two-Component Solventless Laminating Adhesive For Flexible Packaging – KANGDA

Composite polyurethane adhesive as the high-end products of the industry, although later because the start time, relatively few r&d and other historical reasons, the technology level of domestic manufacturing enterprises on a few products are unable to compete with international enterprise, but benefit from the domestic application of new materials in the field of development and the rapid development of domestic economy in 10 years, still maintained a strong momentum of development,  In the past 10 years, the output and sales increased rapidly with an average growth rate of 20%.

In 2009, the domestic industrial added value increased by 11% compared with 2008, the production of composite polyurethane adhesive used in the field of plastic flexible packaging in China reached 215,000 tons, still achieved a high growth rate of 26.5%, at the same time, although its sales only accounted for about 5.5% of the total sales of all adhesive varieties,  But the sales volume accounts for more than 8% of the total sales volume of all adhesives, and it has an important position in the whole adhesive industry.  

This product is most popular among our customers. It is suitable for most general products, such as PET/PE, PET/CPP, OPP/CPP, PA/PE, OPP/PET/PE, etc. Its feature of easy to clean is always praised by laminator operators. For its low viscosity, the laminating speed can up to 600m/min (depend on materials & machine), which is of high efficiency.

Used in laminating of various treated film like OPP, CPP, PA, PET, PE, PVDC etc.

Suitable to general packaging and 100℃ boiled packaging
Long pot life≥30 min
Good leveling
Low viscosity
Available to operate in room-temperature at the same time
High lamination speed can achieve 450m/min
Density（g/cm3）
A: 1.12±0.01
B: 0.99±0.01
Payment: T/T or L/C