New Arrival China Structural Epoxy Adhesives For Wind Turbine Blade - Wind Turbine Blade Polyurethane Infusion Resin WD8085A/WD8085B / Wind Power Blade Epoxy Matrix Resin WD0135/WD0137 – KANGDA

Short Description:

Product Detail

Product Tags

Feedback (2)

Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Glue For Plastic Car Parts, Automotive Sealants And Adhesives, Pa Hot Melt Adhesives, We warmly welcome your participation based on mutual benefits in the near future.

New Arrival China Structural Epoxy Adhesives For Wind Turbine Blade - Wind Turbine Blade Polyurethane Infusion Resin WD8085A/WD8085B / Wind Power Blade Epoxy Matrix Resin WD0135/WD0137 – KANGDA Detail:

Wind Turbine Blade Polyurethane Infusion Resin WD8085A/WD8085B

WD8085A/B is specially developed for the vacuum infusion process of wind turbine blades. It has low viscosity at room temperature, long operation time, fast curing after heating, and high production efficiency. It has excellent mechanical properties, excellent impact resistance, fatigue resistance and chemical corrosion resistance.

Wind Power Blade Epoxy Matrix Resin WD0135/WD0137

The main agent WD0135 and curing agent WD0137 are two components of the solvent-free epoxy resin system. After mixture, the resin system exhibits low viscosity, long operating time, and after being cured, it exhibits high strength, high toughness, low density, low shrinkage and other properties. Therefore, the WD0135/WD0137 epoxy resin system is especially suitable for vacuum infusion to wind turbine blades .

The WD0135/WD0137 resin system has low mixing viscosity, excellent wetting property to glass fiber, and the system does not contain any volatile substances, suitable for RTM vacuum infusion craft, mainly used in the manufacture of wind turbine blades.

Wind Turbine Blade Polyurethane Infusion Resin WD8085A/WD8085B	Wind Power Blade Epoxy Matrix Resin WD0135/WD0137
Low viscosity, Long operation time, good wettability	Accredited by GL;
Fast curing speed, shorten molding time	low viscosity, excellent wettability;
Special formula design reduces sensitivity to moisture	Excellent physical and mechanical performance and excellent fatigue resistance.
Excellent physical and mechanical properties and fatigue resistance

Applicable to vacuum filling process of wind turbine blade; Applicable to preparation of glass fiber composites.

Teach you how to choose a reliable wind turbine blade adhesive:

A) With high strength and toughness, must be able to withstand the centrifugal force of each blade;

B) Excellent operating characteristics, such as no slump, easy pumping, etc.;

C) Good wetting and thixotropy;

D) High compressive resistance, fatigue resistance and aging resistance;

E) The reaction cycle of the adhesive should be closely consistent with the working cycle of the blade die;

F) Excellent gap filling ability, suitable for adhesive tape of different thickness;

G) Low heat release and low curing shrinkage.

Product detail pictures:

Related Product Guide:

In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of New Arrival China Structural Epoxy Adhesives For Wind Turbine Blade - Wind Turbine Blade Polyurethane Infusion Resin WD8085A/WD8085B / Wind Power Blade Epoxy Matrix Resin WD0135/WD0137 – KANGDA , The product will supply to all over the world, such as: America, Durban, Milan, Our company's main items are widely used all over the world; 80% of our products and solutions exported to the United States, Japan, Europe and other markets. All stuff sincerely welcome guests come to visit our factory.

Adhesives For Bonding Wind Turbine Blades